Mark-free robotic demoulding cell for the food industry

A robotic cell designed and integrated by TECH3D to demould products without marking them on a food production line.
Bras robotise avec prehenseur positionne au-dessus du convoyeur bleu, cellule de demoulage robotisee agroalimentaire

FICHE PROJET

CLIENT
TYPE DE PROJET
ROBOT / ÉQUIPEMENT
TECHNOLOGIE
MISSION
RÔLE DE TECH3D

Demoulding a hot, porous and greasy product without marking it is the sticking point of bakery lines. A conventional suction cup fails by nature: the open crumb lets the vacuum leak away, and compensating by increasing the vacuum means crushing the product. For a madeleine production line in France, TECH3D designed a robotic cell that reverses the usual logic: regulating an airflow rather than a vacuum level, and demoulding an entire tray in a single cycle.

🌬️ Our solution: regulate a flow, not a vacuum

Ejectors on the market regulate a high vacuum at low flow: perfect on a sealed surface, they are defeated by a porous crumb. Our cell uses a high-flow turbine with frequency control, which continuously compensates for the leak at a vacuum low enough not to mark the product. The leak is accepted rather than fought: this change of principle is what makes demoulding possible without crushing the part.

Twelve gripping bars, fitted with bellows suction cups in detectable food-grade silicone, are controlled in groups of three. Only the areas actually filled are activated, which keeps the vacuum where it is useful and allows the grip to be adapted to the tray format without changing tools. A vacuum switch on each bar checks the grip; the detection threshold was determined through successive tests on real product, because a circuit that leaks continuously, and whose leak drifts as grease builds up, cannot be set from a catalogue.

📋 Technical specifications

Gripping capacity96 pieces per cycle (12 bars × 8)ManipulatorABB articulated robot
Throughput2 to 9 trays per minutePLCSiemens S7-1200
Success rate≥ 98%SupervisionSIMATIC panel, recipe-based operation
Gripping principleHigh-flow, low-vacuum suctionRemote maintenanceEwon industrial router
Gripping elementsBellows suction cups, detectable food-grade siliconeSafetyFenced cell, interlocked doors, emergency stops
ZoningBars controlled in groups of threeIntegrationConnection to the existing line supervision
Vacuum generationFrequency-controlled turbineTarget productsMadeleines, sponge cakes, soft products demoulded hot
Grip checkVacuum switch, per barPlacingSynchronised active blow-off

🎯 What makes the difference

Grip checking despite the leak

On a circuit that leaks continuously and whose leak drifts as grease builds up, a standard vacuum switch can no longer tell anything apart. The detection threshold used for this cell was determined through successive tests on real product, not by theoretical setting.

One format, one recipe

Path, active bars, vacuum and throughput are stored per recipe from the SIMATIC panel. Changing product runs is a simple selection, with no mechanical intervention on the cell.

🛠️ The TECH3D skills involved in this project

This cell illustrates the full range of know-how we put at the service of our industrial customers, from study to commissioning:

Robotics: integration of an ABB articulated robot for handling and for synchronising placement with the downstream packaging machines.

Automation: programming of a Siemens S7-1200 PLC and a supervision system on a SIMATIC panel, with recipe-based operation for product changes without mechanical intervention.

Pneumatic and industrial vacuum engineering: custom design of a gripping system based on regulated airflow rather than conventional vacuum: frequency-controlled turbine, bars zoned in groups of three, and grip-check calibration through tests on real product.

Machine safety: design of a fenced cell with interlocked doors and emergency stops, compliant with the requirements of food production lines.

Remote maintenance: integration of an Ewon industrial router for remote monitoring and support of the cell.

System integration: connection of the cell to the customer’s existing line supervision, without interrupting the production flow.

As with all our projects, the study, design, build and commissioning were carried out in-house by our teams, using our own technology building blocks.

📈 Results in production

The cell is in operation on an industrial madeleine line in France, with a demoulding success rate of 98% or more, a throughput of 2 to 9 trays per minute and a gripping capacity of 96 pieces per cycle – a complete tray demoulded and placed on every pass of the robot.

🔄 A transferable solution

The regulated-flow gripping principle is not limited to madeleines: it can be applied to any porous or fragile product demoulded hot – sponge cakes, soft biscuits and, more broadly, any food product for which a conventional suction cup marks or crushes the piece. Each cell is still custom-designed, based on our technology building blocks and the specific constraints of each line.

🧩 Why choose TECH3D for your project?

Since 2010, TECH3D has supported manufacturers in their robotisation and automation projects from its base in the Grand Est region of France, close to Strasbourg, Metz and Nancy. We approach every special gripping project with the same method: analysis of the product and the constraint, custom design, then deployment and follow-up via remote maintenance.

Icons illustrating TECH3D’s strengths: expertise since 2010, based in the Grand Est, site analysis, deployment and follow-up

Facing a difficult gripping or demoulding problem on your line? Contact our team for an analysis of your product and a recommendation tailored to your process.

Bras robotise avec prehenseur positionne au-dessus du convoyeur bleu, cellule de demoulage robotisee agroalimentaire
Prehenseur multi-ventouses developpe par Tech3D pour la prehension des rampes de moules
Pupitre de commande HMI Siemens SIMATIC avec interface recette St Michel, cellule de demoulage robotisee
Vue d'ensemble de la cellule robotisee de demoulage avec convoyeur bleu, agroalimentaire
Systeme de verrouillage de securite sur la porte grillagee de la cellule robotisee de demoulage
LinkedIn
Email

FICHE PROJET

CLIENT
TYPE DE PROJET
ROBOT / ÉQUIPEMENT
TECHNOLOGIE
MISSION
RÔLE DE TECH3D

Contents

A project on your site?

Needs analysis, solution selection, integration and commissioning.

Read more

Remise du label ABB Robotics Value Provider à TECH3D

TECH3D awarded the ABB Robotics Value Provider label

TECH3D has been awarded the ABB Robotics Value Provider label, which recognises its expertise in integrating ABB robotic solutions.
LIRE L’ARTICLE ↗
Robot de nettoyage autonome PUDU CC1 Pro

PUDU CC1, MT1 or BG1: which autonomous cleaning robot is right for your business?

Area, floor type, cleaning frequency: the criteria for choosing between the PUDU CC1, MT1 and BG1 autonomous cleaning robots.
LIRE L’ARTICLE ↗
Robot de nettoyage autonome MT1 Max déployé par Tech3D dans le Grand Est

Autonomous cleaning robots for businesses: TECH3D launches its cleaning robotics offer in the Grand Est region

On-site demonstration, commissioning and maintenance: TECH3D launches its autonomous cleaning robot offer in the Grand Est region.
LIRE L’ARTICLE ↗

YOUR PROJECT

A robotics project in mind? Let’s talk.

Describe your need: a TECH3D expert will call you back to assess feasibility, on site if needed.