PUDU CC1, MT1 or BG1: which autonomous cleaning robot is right for your business?

Area, floor type, cleaning frequency: the criteria for choosing between the PUDU CC1, MT1 and BG1 autonomous cleaning robots.
Robot de nettoyage autonome PUDU CC1 Pro

FICHE PROJET

CLIENT
TYPE DE PROJET
ROBOT / ÉQUIPEMENT
TECHNOLOGIE
MISSION
RÔLE DE TECH3D

CC1, MT1, BG1: the PUDU range includes several families of autonomous cleaning robots, each designed for a different type of site. Before starting a cleaning robotisation project, the question we are asked most often at TECH3D is simple: which model really suits my premises?

We presented our professional cleaning robotics offer in the Grand Est region in a previous article. This time, we go into technical detail: this guide compares the three PUDU families, CC1, MT1 and BG1, with their Pro and Max variants, to help you identify the solution suited to the size, use and layout of your site.

🤖 Three families, three different uses

Before comparing figures, here is the general logic of the range:

  • PUDU CC1 (and CC1 Pro): the versatile 4-in-1 robot (sweeping, scrubbing, mopping, vacuuming), designed for medium-sized commercial and office areas;
  • PUDU MT1 (and MT1 Max): a high-throughput sweeper for very large industrial and logistics areas, up to 100,000 m²;
  • PUDU BG1 (and BG1 Pro): a high-capacity scrubber-dryer for large indoor volumes, with large tanks to limit interruptions.

The Pro and Max variants do not always add more raw power: above all, they bring navigation capabilities, quality control or use in more demanding environments, as detailed below.

📋 Technical comparison

ModelTypeCleaning widthCoverage efficiencyRuntimeIdeal environment
CC1 Pro4-in-1: sweeping, scrubbing, mopping, vacuuming500 mm (with side brush)700 to 1,000 m²/h~5 h (up to 9 h in quiet mode)Shops, offices, public buildings
MT1High-throughput autonomous sweeper700 mmup to 1,800 m²/h4 to 8 hIndoor warehouses and industrial sites, up to 100,000 m²
MT1 MaxAutonomous sweeper, outdoor version (IP54)700 mmup to 2,200 m²/h5 to 10 hMixed indoor/outdoor sites, low light
BG1 / BG1 ProHigh-capacity scrubber-dryer550 mm (708 mm with side brushes)up to 2,000 m²/hup to 7.5 hLarge indoor volumes, sites with complex layouts (Pro)

PUDU manufacturer figures, given for continuous operation; they may vary depending on site layout and accessories fitted.

🧴 PUDU CC1 and CC1 Pro: the all-rounder for commercial and office areas

PUDU CC1 autonomous cleaning robot

The PUDU CC1 combines four functions in a single machine: sweeping, scrubbing, mopping and vacuuming. It is the best-suited format for offices, shops, reception halls and public buildings, with automated water and charging management.

The CC1 Pro version keeps the same basic performance but adds an AI-powered rear camera able to check cleaning quality in real time, detect residual marks and automatically trigger a second pass over the area concerned. Its navigation also moves to LiDAR and vision fusion, with no need for QR markers on the floor.

🏭 PUDU MT1 and MT1 Max: the champion of large areas

PUDU MT1 autonomous cleaning robot for large industrial areas

Designed for very large areas to be dry-cleaned, the PUDU MT1 combines several navigation technologies – LiDAR SLAM, VSLAM and 3D perception – to operate in dynamic environments: production halls, industrial aisles, storage areas and logistics spaces.

The MT1 Max is the outdoor version: IP54-certified against dust and water splashes, it features warning lights and floor projection lights for the safety of pedestrians and vehicles, and can operate in low-light conditions. It also covers a slightly larger area than the standard MT1.

💧 PUDU BG1 and BG1 Pro: the solution for large volumes

PUDU BG1 autonomous cleaning robot for large indoor volumes

With its large tanks (up to 75 litres of clean water and 60 litres of dirty water), the PUDU BG1 is designed for high-volume sites where interruptions for draining or refilling must remain rare: large commercial accounts and busy industrial sites.

The BG1 Pro version moves to 3D LiDAR navigation fused with VSLAM, making it more robust on complex or changing site layouts, with a slightly higher cruising speed.

🧭 How to choose the right robot for your site?

In short, here are the recommendations we give most often during our site analyses:

  • Offices, shops, medium-sized public buildings → CC1, or CC1 Pro if automated quality control is required;
  • Indoor warehouse or logistics site, large area to sweep → MT1;
  • Mixed indoor/outdoor site or poorly lit areas → MT1 Max;
  • Very high-volume industrial or commercial site, extended runtime needed → BG1;
  • Site with a complex or changing layout → BG1 Pro.

These guidelines remain general: the actual configuration of your premises (area, floor type, traffic flows, time constraints) is decisive in refining the choice of model and accessories.

🧩 Why choose TECH3D for your project?

Since 2010, TECH3D has supported manufacturers in their robotisation and automation projects from its base in the Grand Est region of France, close to Strasbourg, Metz and Nancy. We approach robotic cleaning with the same method as our other integration projects: site analysis, sizing of the solution, then deployment and follow-up.

Icons illustrating TECH3D’s strengths: expertise since 2010, based in the Grand Est, site analysis, deployment and follow-up

Hesitating between several PUDU models for your site? Contact our team for an analysis of your premises and a recommendation tailored to your activity. You can also read our article presenting TECH3D’s cleaning robotics offer in the Grand Est region.

LinkedIn
Email

FICHE PROJET

CLIENT
TYPE DE PROJET
ROBOT / ÉQUIPEMENT
TECHNOLOGIE
MISSION
RÔLE DE TECH3D

Contents

A project on your site?

Needs analysis, solution selection, integration and commissioning.

Read more

Remise du label ABB Robotics Value Provider à TECH3D

TECH3D awarded the ABB Robotics Value Provider label

TECH3D has been awarded the ABB Robotics Value Provider label, which recognises its expertise in integrating ABB robotic solutions.
LIRE L’ARTICLE ↗
Bras robotise avec prehenseur positionne au-dessus du convoyeur bleu, cellule de demoulage robotisee agroalimentaire

Mark-free robotic demoulding cell for the food industry

A robotic cell designed and integrated by TECH3D to demould products without marking them on a food production line.
LIRE L’ARTICLE ↗
Robot de nettoyage autonome MT1 Max déployé par Tech3D dans le Grand Est

Autonomous cleaning robots for businesses: TECH3D launches its cleaning robotics offer in the Grand Est region

On-site demonstration, commissioning and maintenance: TECH3D launches its autonomous cleaning robot offer in the Grand Est region.
LIRE L’ARTICLE ↗

YOUR PROJECT

A robotics project in mind? Let’s talk.

Describe your need: a TECH3D expert will call you back to assess feasibility, on site if needed.