ABB ROBOTICS VALUE PROVIDER

Integration of autonomous mobile robots (AMR) for your internal flows

Mobile robots that carry totes, carts or pallets between your storage and production areas. As a designer and integrator of robotic solutions, TECH3D studies your flows, designs the installation and integrates AMRs from eight brands, including ABB, KUKA and PUDU.

ABB AMR P604

IN OPERATION

1st ABB T702 AMR

installed in France by TECH3D

8 AMR brands

multi-brand integrator

15+ years

of robotics expertise

FR · LU · BE · DE

service area

THE ISSUE

Internal transport ties up hours that produce nothing.

[01]

Forklift drivers and operators hard to recruit

Internal transport jobs have high turnover and remain hard to fill, especially on shift work.

[02]

Lines waiting for their parts

A late supply stops a workstation. Irregular flows make the throughput of the whole line fluctuate.

[03]

Risky traffic

Forklifts, pedestrians and pallets share the same aisles: a source of accidents and repeated load carrying.

SITE MAPPING

ROUTES

Logiciel ABB AMR Studio : conception des circuits des robots mobiles

TURNKEY

A complete AMR project, not just a robot.

01

Analysis of your flows

What is transported, between which areas, how often.

02

Robot selection

From our eight brands, according to the load, the carrier and the width of your aisles.

03

Mapping and routes

Site survey, definition of routes and pick-up and drop-off points.

04

Safety of shared areas

Risk assessment and traffic rules with pedestrians and forklifts.

05

Interfaces with your site

Workstations, conveyors, doors, information systems, depending on the project.

06

Training and maintenance

Your teams trained, follow-up provided by TECH3D.

CUSTOMER CASE – VELUX

Installation of the first ABB T702 AMR in France

THE NEED

Automate the transport of materials between several production lines, to reduce repetitive tasks while keeping a safe and flexible process.

THE SOLUTION

Integration by TECH3D of an ABB T702 AMR with VSLAM navigation (3D vision): it maps its environment and moves without floor markings.

THE RESULT

Transport between lines automated, with routes that can be reprogrammed without any building work.

RETURN ON INVESTMENT

What an AMR changes in your flow costs

The return on investment depends on your distances, your transport frequencies and your shift organisation. We calculate it during the study, based on your actual flows.

Transport hours reallocated

Time spent moving loads goes back to production tasks.

Lines supplied on time

Regular deliveries to the workstation, including at night and at weekends.

Safer traffic

Fewer crossings between forklifts and pedestrians, less load carrying.

Adjustable routes

A layout change is handled with new settings, without any floor work.

Studied, mapped, integrated, maintained.

STEP 01

Flow study

Site visit and survey of internal transport.

STEP 02

Design

Choice of brand and model, routes, costing and ROI.

STEP 03

Mapping

Site survey and creation of routes.

STEP 04

Commissioning

Tests in real conditions with your teams.

STEP 05

Training

Operators and maintenance staff trained.

STEP 06

Maintenance

Follow-up, troubleshooting and route changes.

FAQ

AMR frequently asked questions

Another question? A TECH3D expert will answer you.

An AGV follows guidance installed on the floor (tape, magnets or reflectors) and stops in front of an obstacle. An AMR maps the site and calculates its own path: it goes around obstacles, and its routes are changed by simple configuration, with no floor work.

Yes, that is the most common use. AMRs are fitted with safety sensors that make them slow down and then stop when a person or obstacle approaches. Before commissioning, we assess the risks and define the traffic rules for shared areas with your teams.

Generally not: the AMR finds its way using the site map, with no tape or floor markings. The flow study checks the condition of the floors, the width of the aisles, slopes and doors to pass through, and identifies any adjustments to plan.

The choice depends on what is transported (totes, carts, pallets), the load, the width of the aisles and the interfaces with your equipment. As a multi-brand integrator, we compare the suitable models during the flow study and recommend the most relevant one for your site.

There is no standard lead time: it depends on the number of robots, the complexity of the routes, the interfaces with your site and delivery times. We draw up a detailed schedule for each project, from the offer stage.

FLOW STUDY

An internal flow to automate? Let’s talk.

Describe what you transport, between which areas and how often. A TECH3D expert will call you back to assess feasibility and arrange a visit to your site.